[ENG-ESP] STEAMPUNK ROBOTIC SPIDER WITH RECYCLING MATERIALS - ARAÑA ROBÓTICA STEAMPUNK CON MATERIALES DE RECICLAJE

in Build-It3 years ago

PORTADA.jpg

Hello dear friends of Hive, I send greetings to all those who are part of the Build-It community and who publish their beautiful works made with their own hands and a lot of creativity. I feel very happy to belong to such an active community and where more and more people are joining with a lot of creativity. This time I want to share my latest DIY work, it is a monstrous robotic spider in steampunk style. It is made with materials that I use in all my works such as soda cans and computer parts. I hope you like it and it is to your liking. I am very afraid of insects that is why I decided to make one
Hola queridos amigos de Hive, envío un saludos para todos los que hacen parte de la comunidad Build-It y que publican sus hermosos trabajos realizados con sus propias manos y mucha creatividad. Me siento muy contento de pertenecer a una comunidad tan activa y donde cada vez más se unen mas personas con mucha creatividad. En esta oportunidad quiero compartir mi ultima obra de bricolaje, se trata de una monstruosa araña robotica en estilo steampunk. Esta hecha con materiales que suelo usar en todas mis obras como latas de soda y partes de computadoras. Espero que les guste y sea de su agrado. Le tengo mucho pavor a los insectos por eso decidi hacer uno

Zskj9C56UondJxcjVaienfhVaNb7LJVWG6e787ga1E18nw8oqJXcdH3sS9jXL6sNxqcCwEqh4gcNCFPnm15gdExitJ7TSRZ3m8WdHhwyrdVXNEHB67LS.png

Process

181183944_2527374754238841_7356936935651197981_n.jpg

Materials:

  • Aluminium can
  • Computer board
  • Light bulb
  • Copper wire
  • Super glue
  • Tongs
  • Pair of scissors

Materiales:

  • Lata de aluminio
  • Placa de computadora
  • Bombillo
  • Alambre de cobre
  • Super pegamento
  • Tenazas
  • Tijeras

Zskj9C56UondJxcjVaienfhVaNb7LJVWG6e787ga1E18nw8oqJXcdH3sS9jXL6sNxqcCwEqh4gcNCFPnm15gdExitJ7TSRZ3m8WdHhwyrdVXNEHB67LS.png

180965162_1600225893499919_6660010557807211212_n.jpg

182848257_829851161274817_1775169215889134256_n.jpg

The first step is to clean the bulb very well, which will be most of the spider's body, then cut the copper that we will use, which will be little, only for the tips of the extremities. We take and cut the can and take strips that measure one centimeter and with it we will make the extremities.<-div>
El primer paso es limpiar muy bien el bombillo que será la mayor parte del cuerpo de la araña, luego cortar el cobre que utilizaremos que sera poco, unicamente para las puntas de las extremidades. Tomamos y cortamos la lata y sacamos tiras que midan un centimetro y con ella haremos las extremidades.

Zskj9C56UondJxcjVaienfhVaNb7LJVWG6e787ga1E18nw8oqJXcdH3sS9jXL6sNxqcCwEqh4gcNCFPnm15gdExitJ7TSRZ3m8WdHhwyrdVXNEHB67LS.png

182256982_2896087743975288_2157799590404715409_n.jpg

180510300_1448721168810127_7486655227984686976_n.jpg

181257478_238441781392148_1931686389382076266_n.jpg

To make the limbs we cut two pieces of cans and make two tubes 4 cm long, and make a smaller one 1.5 cm long. We join them with glue for each end and at the end we will put a copper base. We will make a total of 8 tips.
Para hacer las extremidades cortamos dos pedazos de latas y hacemos dos tubos de 4 cm de largo, y hacemos uno mas chico de 1,5cm de largo. Los unimos con pegamento por cada punta y al final pondremos una base de cobre. Haremos en total 8 extremidades.

Zskj9C56UondJxcjVaienfhVaNb7LJVWG6e787ga1E18nw8oqJXcdH3sS9jXL6sNxqcCwEqh4gcNCFPnm15gdExitJ7TSRZ3m8WdHhwyrdVXNEHB67LS.png

182815982_995981607605152_1328274257382335459_n.jpg

182380522_211194097216792_2698691915872071306_n.jpg

182686746_1329326604105477_7118732515857844160_n.jpg

Then we begin to form the body, for this we cut two pieces of the computer plate that measure 2 cm long by 1 cm wide, we fix it to the base of the bulb with glue and let it dry very well.
Después comenzamos a formar el cuerpo, para ello cortamos de la placa de computadora dos retazos que midan 2 cm de largo por 1 cm de hancho, lo fijamos a la base del bombillo con pegamento y dejamos secar muy bien.

Zskj9C56UondJxcjVaienfhVaNb7LJVWG6e787ga1E18nw8oqJXcdH3sS9jXL6sNxqcCwEqh4gcNCFPnm15gdExitJ7TSRZ3m8WdHhwyrdVXNEHB67LS.png

181106239_615840826046621_665598038646692563_n.jpg

180032427_811033499513966_6940902360776838149_n.jpg

182284664_170642168191356_3403458052337436896_n.jpg

181638819_294674165547188_1680662591486680289_n.jpg

The last step is to glue the extremities. For them we take one of the tips and with a pair of tweezers we crush it until it is flat, we put a few drops of super glue and we fix it to the body of the robot. Let's repeat the process with each limb, placing them very well so that they are in good shape. Then we let it dry for a few minutes.
El ultimo paso es pegar las extremindades. Para ellos tomamos una de las puntas y con unas pinzas aplastamos hasta dejarla plana, le ponemos unas gotas de super pegamento y lo fijamos al cuerpo del robot. Vamo repitiendo el proceso con cada extremidad ubicandolas muy bien para que nos queden en buena forma. Luego dejamos secar unos minutos.

Zskj9C56UondJxcjVaienfhVaNb7LJVWG6e787ga1E18nw8oqJXcdH3sS9jXL6sNxqcCwEqh4gcNCFPnm15gdExitJ7TSRZ3m8WdHhwyrdVXNEHB67LS.png

181460185_221456706009401_4406717383535237000_n.jpg

PORTADA 4.jpg

At the end I added a led light bulb to the head to give it a more robotic look and I also put 3 tubes at the bottom of the head to simulate the pliers they have in their mouth.
Al final agregué un bombillo led a la cabeza para darle un aspecto más robótico y tambien puse 3 tubos en la parte inferior de la cabeza para simular las tenazas que tienen en la boca.

Zskj9C56UondJxcjVaienfhVaNb7LJVWG6e787ga1E18nw8oqJXcdH3sS9jXL6sNxqcCwEqh4gcNCFPnm15gdExitJ7TSRZ3m8WdHhwyrdVXNEHB67LS.png

Final Work

PORTADA.jpg

PORTADA 1.jpg

PORTADA 2.jpg

183190927_2937201986606287_4011705638871349550_n.jpg

183317326_311942513632793_7289989449229226068_n.jpg

ARAÑA q.jpg

This is how this terrifying robotic spider has been, its size is impressive and very realistic, not even in my worst nightmares would I hold a real spider that way hahaha. The Steampunk style allows you to play with many materials to give objects a somewhat futuristic appearance, although it is used more in literature and in the cinema, this style of art is also found in sculpture and thanks to this I have asked for inspiration. I hope you liked my explanation of how I did it and the final results. I have been very satisfied and I think I will continue in this trend for a long time to bring new and better works to share in this community that encourages me to keep going and to be better and better, I feel very motivated.

I say goodbye to you, see you soon, you can comment what you think and if someone would like me to do something in particular I would gladly do it. See you soon friends.

Así ha quedado esta aterradora araña robótica, su tamaño es impresionante y muy realista, ni en mis peores pesadillas sujetaría de esa forma a una araña real jejea je. El estilo Steampunk permite jugar con muchos materiales para dar una apariencia algo futurista a los objetos, aunque se usa mas en la literatura y en el cine, este estilo de arte tambien se encuentra en la escultura y gracias a ello he pidod inspirarme. Espero que les haya gustado mi explicación de como la hice y los resultados finales. He quedado muy satisfecho y creo que seguiré en esta tendencia un buen tiempo para traer nuevos y mejores trabajos para compartir en esta comunidad que me anima a seguir adelante y a ser cada vez mejor, me siento muy motivado.
Me despido de ustedes, hasta pronto, pueden comentar que les ha parecido y si alguien le gustaría que hiciera algo en especial yo con mucho gusto lo haría. Hasta pronto amigos.
Sort:  

La araña está hermosa, ahora nos debes esa misma araña pero mecanizada para que se pueda mover jajajs

jajajaja tengo que ver que mecanismo uso para que se pueda mover. Si es aterradora estática no me quiero imaginar si se mueve.

Gran trabajo @fixie, parece que se va a mover. es un honor ver tantos artistas en la colmena. Continuos así.

Que bueno que te haya gustado, si supiera de electrónica no duraría en hacer que se mueva. sería un espectaculo. Yo tambien estoy muy contento de poder ver tantas personas con obras maravillosas. Son muy geniales!

Algunos utilizan los impulsores de cuerdas mecánica que traen mucho los carritos de juguete , lo difícil será, en este caso, sincronizar el movimiento de las patas con engranajes y reductores. Jeje

Siempre nos sorprendes con tu talento , felicitaciones.saludos

Agradecido que te haya gustado, es un placer compartir mi trabajo con la comunidad.

wow! esta increíble!! 😃💗

gracias que bueno que te haya gustado el diseño de esta araña!