[ENG-ESP] Bunny sandals, for my princess. / Sandalias de conejita, para mi princesa.

in DIYHub5 months ago


Good morning, my friends, taking advantage of this cold day, take the opportunity to make another beautiful craft. I'll tell you a little about what it is about.
My queen is already a maximum of 10 days old, with a nail that appeared on her little finger, now she is a little better, due to her treatment. But I can't put a stocking on it yet, for this very reason I made him some bunny sandals. She used very little material, but she made them simple and quite delicate, just for my princess.


Muy buenos días, mis amigos, aprovechando este día tan frío que hace, aproveche para hacer otra bella manualidad. Les contaré un poco de que se trata.
A mi reina ya tiene como un máximo de 10 días, con uñero que le salió en su dedito, ahorita lo tiene un poco mejor, por su tratamiento. Pero no le puedo colocar aún media, por este mismo motivo le hice unas sandalias de conejita. Utilice muy poco material, lo que sí fue que las elabore sencillas, y bastante delicadas, justamente para mi princesa.

FotoJet (2).jpg


Step 1:
To make them, I made 2 cardboard soles, the smallest ones, my daughter's feet are still small, but chubby, ha, ha, ha. Cut 4 of the white foam to use 2 for each cardboard sole, use a pattern to cut the upper.


Paso 1:
Para hacerlas, hice 2 suelas de cartón, las más pequeñas, la cual mi hija tiene los pies aún pequeños, pero gordito, ja, ja, ja. Corte 4 de la goma eva blanca para utilizar 2 para cada suela de cartón, use un patrón para cortar el empeine.

FotoJet (4).jpg


Step 2:
I used the white color to cut the snout, the slightly large ears, and the fuchsia color to cut 4 smaller ears.


Paso 2:
El color blanco lo usé para cortar el hocico, las orejas un poco grandes, y el fucsia para cortar 4 orejas más pequeñas.

FotoJet (5).jpg


He opens a hole, I use it to take out 4 circles of black EVA foam, cut fuchsia, 2 small noses and 2 strips 0.5 cm long x 23 cm wide.


Él abre hueco, lo utilice para sacar 4 círculos de la goma eva negro, del fucsia corte, 2 narices pequeña y 2 tiras de largo 0.5 cm x 23 cm de ancho.

FotoJet (6).jpg


Step 3:
In this part I began to assemble, which is the part of the sole, next to the instep, then through this other opening I glued the other part of the instep, leaving both in this way.


Paso 3:
En esta parte comencé a armar, lo que es la parte de la suela, junto al empeine, luego por esta otra abertura pegue la otra parte del empeine, quedando ambas de esta forma.

FotoJet (7).jpg


Step 4:
On the white ears, I proceeded to glue the smaller ones, and put together the bunny's face, with her eyes and nose, until I attached the face next to the ears. Then I placed the strip that I cut around the entire contour of the sandal, to prevent the connection between the soles and the cardboard from being seen, and to finish on the instep I placed the face of the bunny, and thus I concluded these adorable sandals, It was very easy to make them, and at the same time very comfortable, I know that when I put them on my daughter, they will fit snugly and look very beautiful. I hope you like this type of sandals. And if they have daughters they can make them ones like this model or to her liking.
Happy start of the week.
Until another day.


Paso 4:
En las orejas blancas, procedí a pegar las más pequeñas, y a armar la cara de la conejita, con sus ojos y nariz, lleve a unir la cara junto a las orejas. Luego la tira que corte, la coloque por todo el contorno de la sandalia, para evitar que se viera la unión entre las suelas y el cartón, ya para finalizar en el empeine coloque la cara de la conejita, y así concluyo estas adorables sandalias, fue muy fácil elaborarlas, y a la vez muy cómodas, sé que al colocárselas a mi hija, le quedaran ajustadas y se le verán muy bellas. Espero que le guste este tipo de sandalias. Y que si tienen hijas le puedan hacer unas así de este modelo o a su gusto.
Feliz comienzo de semana.
Hasta otro día.

FotoJet (8).jpg

The photos were taken from a Xiaomi Mi A2.

Collage making program: Fotojet Link
Translated from google translator Link
Photo editing program: PhotoFiltre 7

Las fotos fueron tomadas desde un Xiaomi Mi A2.
Programa para hacer el collage: Fotojet Enlace
Traducido del traductor de Google Enlace
Programa para editar fotos: PhotoFiltre 7

I say goodbye until another opportunity.
Thanks for your support.

Me despido hasta otra oportunidad.
Gracias por su apoyo.

Copyright @imargasa. All rights reserved.

Sort:  

👍 ❤️ Upvoted ❤️ 👍

  • Upvote Suggested by @bhattg
  • Show Support by upvoting this comment
 5 months ago  

the bunny sandals look so cool, thanks for sharing.

Que tiernas quedaron, a ella le debe haber encantado 🥰

Que bellaas, me encantaron esas sandalitas!! Muy tiernas💗