Orgonite - Make Your Own Positive Energy Device

in #howto7 years ago (edited)

How to Make Your Own Orgonite Positive Energy Device

20170704_083109_crop_459x276.jpg

2 crystal shaped orgonite devices and 1 real smokey quartz crystal in the middle

Orgonite is primarily made from metal chips (copper, brass, aluminum, silver, gold, even steel wool.), polyester resin (I'll tell you why fiberglass resin is the best) and a quartz crystal.

Orgonite helps to raise the vibrations in your environment.

When you apply pressure to a quartz crystal, it produces an electrical charge. So when you suspend it in a resin such as fiberglass, the crystal is under constant pressure.

Adding metal helps the device to create a substance which functions as a self-driven, continuously-operating, highly efficient DOR→POR (negative to positive) energy transmutation factory.

Google: Reich Orgonon for more information.

How to Make

First start with your 3 main ingredients

  • metal shavings
  • resin
  • quartz crystal

Next decide on a shape. You can use many things for your mold. Small cups, candle molds, etc.

I wanted my orgonite to resemble a crystal that I owned. So I purchased a mold making kit from a craft store.

20170704_082054_crop_418x553.jpg

I used this crystal to make the mold.

20170704_082015_crop_367x300.jpg

20170704_082041_crop_367x486.jpg

Once you have a mold you may have to add a vegetable spray or other lubricant to get the finished shape out easily. My mold did not require that.

Do a dry run with your ingredients so you will know how much to add when the resin is mixed.

I cut up aluminum foil.

20170704_081934_crop_367x367.jpg

I also added some scrap gold computer pins.

20170704_082938_crop_367x367.jpg

I had several quartz crystals to choose from. A large one was centered in the mold. It is unnecessary to add more, but I threw in some smaller one for fun.

20170704_081841_crop_438x367.jpg

As mentioned earlier, fiberglass works great, but it has a yellowy tinge to it. For this project I used a craft resin which dries clear.

20170704_083233_crop_443x463.jpg

Mix your resin according to the package instructions. Add dry ingredients to your mold and fill with resin.

Keep in mind, heavier items will sink. You will need to be strategic here. Also, ensure you are not trapping any bubbles.

Once dry (after 24 hours or so) remove your newly made orgonite and place in an area where you would like negative energy replaced with positive energy (near computer, bedside table, etc.)

Alternatively, you can gift them or sell them on ebay!

20170704_082309_crop_384x418.jpg

Have fun! Hope you enjoyed this post.


by @susieisms

Sort:  

that's good!!

This post received a 2.5% upvote from @randowhale thanks to @susieisms! For more information, click here!

My wall need be voted too, if some of my publications could like to you, you are welcome to help XD

Very interesting, but i have a question, if i not have resin, exist other similar material that i could use?. Thanks for share it

Hi @marram. Do you have fiberglass?
I am guessing concrete would work because it shrinks as it dries and will put pressure on the crystal. It won't look pretty. That is only my guess. Can you google orgonite? Lots of ideas out there.
Good luck and thanks for commenting.

i had only curiosity if could be made with other material and i trust more in people that know (like you) than random pages of internet.
Actually i can buy more easy fiberglass than resin, Thanks for this help.

This Post have been Manually Curated / Upvoted.
Thanks for using #whalepower Tag ,
Please share Our #whalepower Tag with the community . Upvote , Follow, Reblogged Us , when ever you can.
This message comes-up when #whalepower Tag in use.
#whalepower is community project
Curated By @paul-gillbanks for #whalepower Tag
Founder @bullionstackers
Latest Blog – Please Click to Read

Follow me @irfanbocor thanks 😊

Cool! I bought one once at a psychic fair and I've always wondered how it was made. Thanks!

Nice to see you again @lenadr

Upvotes you and following please do same in return :)

Thank you for resteeming my post. I am following you now.

those molds are amazing! i love how they end up looking like a crystal! more #scalar posts on steemit! one orgonite tip i heard, is to use the finest metal particles you can, like metal dust! the more frequently the material in the orgonite alternates between metal and resin, the more powerful it is

Thank you.
I appreciate the extra knowledge.